10
User Guide ProCair Prime
5
Snap the hanging hook over the back of the
control handset as shown. Hang the control
handset over the foot end of the bed.
Ensure the handset is secure and not at risk
of falling off before use to prevent equipment
damage.
4
Check the internal quick release control unit
air connectors are securely connected. Open
the top cover by unzipping the right side of the
mattress (zipper located at foot end), check the
two connectors are secure by pushing the male
and female ends together, there should be no
movement. If a connection is open, a click will be
heard once connector is firmly closed.
System Preparation
6
Feed power cord through the cord retention
loops along either side of the mattress base.
Insert power cord plug into the side of the control
unit, then connect to an appropriate electrical
outlet and switch on mains power.
The Standby indicator on the handset will glow
amber, confirming the control unit is connected
to a power source.
Ensure the power cord is not under strain; is free
from obstruction; and is secured safely so as not
to be a trip hazard.