The equipment does not turn on
• Is the equipment connected to a proper AC
net through the voltage cable provided by
the manufacturer?
No sound
• Are the microphones and other sound
sources correctly connected to the equip-
ment inputs?
• Are the gain controls and faders correctly ad-
justed? Is the main output fader up?(MAIN MIX)
• Are the power cables correctly connected to the
speakers?
The sound is weak, distorted or noisy
• Are the gain controls and faders cor-
rectly adjusted? Is the main output fader
up?(MAIN MIX)
• Are two different instruments connected to
the XLR microphone input and TRS line of
the same channel? Please connect only one
input instrument per channel.
• Has the input signal the correct level to get
to the equipment?
• Are you using effects at the correct level?
• Are the microphones connected to the XLR
inputs?
• If you are using a condenser microphone, is
the Phantom Power (+48V) on?
The effect cannot be heard
• Make sure that the channels that you want
to be processed by the effects have the ef-
fect sending switch correctly set.
• Note if the effect fader is up.
I want to hear the voices clearly
• Adjust the equalization parameters of each
channel.
