02/17 Rev. 02
SERVICE MANUAL
Attachment, Setup, Service
Rewinder
2000
24
[10] Setting of the shortcut current on boards of the older type (recognizable by the two
potentiometers).
(TTX 350 / TTK) Setting the output stage
The peripherals board used in TTX 350 and TTK must be set to a short-
circuit current of 30 mA [11].
For details on setting the peripherals board refer to the service manual,
topic section "Service Boards", paragraph "Peripherals board".
[11] Setting the short-circuit current on the peripherals board.
30 mA
Z0131.cdr
P1
