02/17 Rev. 02
SERVICE MANUAL
Attachment, Setup, Service
Rewinder
2000
18
Adjusting the sensor
The dancer arm controls the winding speed of the rewinder by means of a
sensor. Bevor applying the rewinder for the first time, the dancer arm has to
be brought in both end positions to adjust the sensor.
[8] “Loose Position” (A) and “Middle Position” (B) of the dancer arm.
Prerequisite: The dancer arm is in loose position (A).
1. Call
Options > Rewinder > Rewinder adjust
. Display
1
:
2. Press key 4. Display
:
3. Move the dancer arm into the middle position (B) and hold it there. Press
the key 4.
In the middle position, the deflection roller of the dancer arm should be
placed below the axle of the rewinder.
4. Restart the printer.
1
Picture shows example values
A
B
