Novexx Solutions XLP 604, User Manual

Page: 80 / 124

User Manual XLP 604
Settings in the Parameter Menu
The settings described below are generally included in the print job, in which case they do not need to
be made. Manual settings that were made before a print job was transferred will be overwritten by the
settings in the print job.
•
Label pitch on page 80
• Material width on page 81
• Material type on page 81
• Print process on page 81
• Temperature Compensation on page 81
Label pitch
► Toggle to the “Home” screen.
A) To measure label pitch automatically:
► Press the keys 3 + 4.
Fig. 40: The label pitch is being measured.
The printer moves the label material forward until the two label starting marks have moved through the
label sensor. The label pitch determined in this way is displayed (see fig. below) and transferred to pa-
rameter Print > Material > Label > Material length . Parameter Print > Material > Label > Material type
is set to “Punched”.
Fig. 41: Dispay of the measured label pitch.
B) To enter the label pitch manually:
1.
Measure label pitch (C).
2.
Call Print > Material > Label > Material length and enter the measured value in millimetres.
Edition 2 - 12/2021 80 Operation
Setting and Monitoring