Novexx Solutions XLP 504, Service Manual

Page: 116 / 248

Service manual
XLP 504 / XLP 506
05/2018 | 09 116 Parameter Menu
Rotated barcodes
Improves readability of rotated (90° and 270°) bar codes.
• Normal : „Normal“ printing without special processing of rotated bar codes.
• Optimized : The line and gap widths of rotated bar codes are modified to improve readability.
Print direction
[140]Orientation of the printout „Foot first“ (A) or „Head first“ (B).
• Foot first : Orientation of the printout according to [140A].
• Head first : Orientation of the printout according to [140B]. Mind the following:

Define the „true“ label length (without gap length) in parameter
Print > Material > Materiallength
length. If the label gap is wider than 5 mm, the parameter
System > Druck > Miss. label tol.
must be set
to a value more than zero.

The distance between material base line and the first printable dot is 1 mm. To keep this di-
stance while printing „head first“, the material width must be calculated as follows:
, with
b
Mat
: Material width
b
Tr
: Backing paper width
Setting range Default setting Step width Easy Plug
Normal, Optimized Optimized -- #PC1013, #YB
Setting range Default setting Step width Easy Plug
Foot first, Head first Foot first -- #PC1027
A B
b
Mat
b
Tr
2 mm – =