User Manual
Rewinder XLP 51x
5.
Adjust the material guides (A) on the dancer arm by pushing them sideways until they correspond
to the width of the material.
The material should run evenly, and there should be a small gap between it and the material
guides.
STARTING/STOPPING
Before you begin
Printer is switched on and is showing the “Home” screen.
Procedure
Starting:
1.
Press key 3 (
).
It is essential to let the dancer arm initially reach its final position after starting. Only then, the
dancer arm takes control over the rotation speed.
The rewinder starts rewinding, until the dancer arm reaches the final position. At that point, the
rewinder stops.
2.
Press key 1 to get to the “Ready” screen.
If a printjob has already been loaded, both printing and rewinding start nearly simultaneously.
Stopping:
3.
To stop or start again, press key 3 (
, works on both screens, “Ready” and “Home”).
Edition 2b - 9/2021
14
Operation / Malfunction / Cleaning
Starting/Stopping
