Operating manual
LTSA LTMA
Item Description
5
Fan cover
6
Bellows
7
Pressure plate
FUNCTIONALITY
The LTSA/LTMA waits in home position in front of the dispensing edge and draws the label onto the
foam pad on its underside as soon as it has been dispensed. The vacuum necessary for this is gener-
ated by a fan.
After the start signal, the LTSA/LTMA moves its pressure plate down until it contacts a resistance
(product), applies the label firmly to the product and immediately starts its return stroke. This automat-
ic reversing function (“Light Touch”) allows products with different heights to be labelled. Any minor un-
evenness in the product surface is compensated by the foam pad of the applicator.
TECHNICAL DATA
Type of material
Self-adhesive labels
Label size (W x L)
min: 30 x 30 mm
max: 80 x 80 mm
Stroke
max. 190 mm
Minimum required stroke (distance between
home position and product contact)
30 mm
Application speed
max. 50 labels/minute
Product speed
max. 35 m/min
Application angle
90° ± 3°
Application direction
From top to bottom
Application precision
± 1 mm (on non-moving products)
Application force
10 N (with 90° application angle)
Air current source
Blowers
Weight
3.2 kg
Dimensions (W x H x D)
218 x 391 x 120 mm
Noise level
< 70 dB(A)
Closed rooms
Working temperature: 5-40°C
Storage temperature: 0-70°C
Ambient conditions
Relative humidity: 30-80%, no water condensation
Edition 02 - 7/2021
9
Product description
Functionality
