Novexx Solutions LA-TO, User Manual And Service Manual

Page: 13 / 30

04/13 Rev. 1.12-02 USER / SERVICE MANUAL Mounting/Setup
LA-TO / LA-TO XL Assembly
12
Mounting to ALX 92x
Tool
4 mm hex socket screwdriver
Assembly
1. Switch-off the ALX 92x.
2. Fasten the LA -TO to the ALX 92x using 3 bolts
[8A].
3. Connect cable to LA -TO and ALX 92x [9A] (article
no. A3744).
4. Connect the interlock circuit of the protective guard
to the LA -TO [9B].
See chapter
Connecting an interlocking guard

on
page 9.

Connecting an interlock circuit is mandatory.
The LA -TO must not and cannot be operated with-
out.
5. Install the pressure regulator.
See chapter Installing the pressure regulator

on
page 16.
6. Connect the compressed air supply.
See chapter Connecting the compressed air hose
(Ø 10 mm).

on page 17.
7. Switch-on the ALX 92x.
8. Make settings in the parameter menu.
See chapter Parameter settings

on page 19.
9. Adjust the LA -TO.
See chapter Settings

on page 19.
[8] Mounting the LA -TO to an ALX 92x.
[9] Connecting to an ALX 92x.
A
A
B