Novexx Solutions ALX 92x, Service Manual

Page: 586 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
64
> CENTRONICS
PnP function
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4
Off
The printer doesn´t send any identification signals to the Centronics port.
On The printer sends identification signals via the Centronics port (if any is
connected) to the host computers Windows operating system. Windows will
search for an appropriate driver. (Default setting).
> NETWORK PARAM.
IP addressassign
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6

A change of this parameter setting forces a printer restart.
Fixed IP address This setting activates the parameters "Net mask" and "Gateway address"
(see below).
DHCP
IP address is assigned automatically. The assigned IP address is displayed
for a moment on the printer display, while the printer is starting.
IP address
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6
xxx.xxx.xxx.xxx
Setting range per xxx value: 0 to 255
Change between the digits by pressing the Cut or Feed button; Acknowledge
the setting by pressing the Online button. After a change of the IP address,
the printer will reset automatically.
Net mask
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 5.4 AP 5.6
xxx.xxx.xxx.xxx Setting range per xxx value: 0 to 255
Depending on the set IP address appears a default value.

We recommend to use the default value!