Novexx Solutions ALX 92x, Service Manual

Page: 364 / 824

12/14 Rev. 05 SERVICE MANUAL Service Electronics
64-xx Gen. 2 – DPM Gen. 2 – ALX 92x Gen. 2
51
Options
Installing a Memory Extension
Requirements
•
64-xx, DPM, PEM or ALX 92x with CPU
board no. A2292 or A2293 installed
•
Upgrade kit for 64MB memory extension
no. A4413 or
•
Upgrade kit for 128MB memory extension
no. A4414
The upgrade kit contains a bag with the
memory module (fig. 1) and an installation
guide.
Installation
Proceed as follows to install the memory
module:
1. Remove the CPU board from the printer.

How to? - Read topic section „Service Me-
chanics“, chapter „Replacing the boards“,
„CPU board“.
2. Take the memory module out of the bag.
The slot for the memory module is located
in the upper third of the CPU board (fig. 2,
white circle).
3. Plug the memory module into the slot
(U201) as illustrated (fig. 3).

The memory module is coded by a dent
(fig. 3). Make sure, that the memory modu-
le fits into the slot as illustrated!
Continued overleaf
1
2
3