Novexx Solutions ALX 92x, Service Manual

Page: 24 / 824

06/16 Rev. 6.01-00 SERVICE-HANDBUCH
ALX 92x
8
Pay attention to the information
Information must be
made available
This service guide
 must be made available to all persons who are entrusted with installing, setting up,
adjusting, or repairing the labeller.
 must be maintained in legible condition.
 must be made available to the new owner if the machine is sold.
 Safety and warning notices attached to the labeller must be kept clean and legible.
Missing or damaged warning plates are to be replaced.
Machine operating safety
Installation, maintenance
Before starting up the machine:
 Carry out test runs using the task-specific settings under near production condi-
tions.
 Only put the machine into operation after at least one successful test run has been
completed.
WARNING!
Reliable and efficient operation of the labeller is only guaranteed if all necessary in-
formation is observed!
 Carry out the installation, connection, programming, setting, and repairing of the
machine exclusively in accordance with the specifications in this manual.
 Observe additional safety and warning notices attached to the labeller.
 Observe and adhere to all relevant ordinances and rules in their applicable form.
Examples:
• Work place regulation
• Accident prevention regulations
• Trade union regulations for occupational safety and health
• Equipment safety law
• Recycling and waste management law
WARNING!
Improper usage of the machine can lead to accidents, material damage and loss of
production!
 When installing the labeller, check for visible shipment damage. Immediately in-
form Novexx Solutions of any damage.
 When installing the machine on a support stand, make sure that it can not tip
over.
 Only put the machine into operation if it is in flawless condition.
 Only perform alterations or conversions to the machine with the consent of
NOVEXX Solutions's customer service.
 Only use original replacement parts.