Rockdale user guide v1.0
7 (18)
Copyright
2012 novero. All rights reserved.
4.3
4.3
4.3
4.3
Pairing
Pairing
Pairing
Pairing Rockdale
Rockdale
Rockdale
Rockdale with Bluetooth devices
with Bluetooth devices
with Bluetooth devices
with Bluetooth devices
Prior to using your Rockdale, you have to pair it with a Bluetooth-enabled device, e.g.
your mobile phone, music player or PC/laptop.
How to enter pairing mode
How to enter pairing mode
How to enter pairing mode
How to enter pairing mode????
Function
Function
Function
Function
Operation
Operation
Operation
Operation
LED indi
LED indi
LED indi
LED indicator
cator
cator
cator
Indication tone
Indication tone
Indication tone
Indication tone
Entering
pairing
mode
Ensure the headset is turned
off, and then press and hold
MFB
MFB
MFB
MFB button for 5 to 7 seconds
until LED flashes red and blue
alternately
LED flashes red and
blue alternately
Two short “beep”
tones
Note
Note
Note
Note Pairing mode will last 2 minutes. If the headset still cannot pair with any
Bluetooth device after 2 minutes, it will automatically return to standby mode in
order to save power.
Pairing the headset with a Bluetooth
Pairing the headset with a Bluetooth
Pairing the headset with a Bluetooth
Pairing the headset with a Bluetooth enabled mobile phone
enabled mobile phone
enabled mobile phone
enabled mobile phone
The pairing procedures are specific for different mobile phone models and brands. Please
refer to your mobile phone’s user manual for further information. The general pairing
procedure is as follows:
1. Make sure the mobile phone and the headset are within Bluetooth range (i.e. not
more than 1 meter apart).
2. Enter the headset’s pairing mode (please refer to chapter 4.3 “How to enter pairing
mode?”);
3. Activate your mobile phone’s Bluetooth function and set your mobile phone to
search for Bluetooth devices. After the search is completed, select the “novero
Rockdale” from the Bluetooth device list.
4. According to the indication, enter password or PIN No. ”0000” and press “yes” or
“confirm”.
5. After successful pairing, select “novero Rockdale” in the Bluetooth device list and
press “connect”.
6. After successfully connecting, the blue LED flashes twice quickly every 5 seconds.
Note
Note
Note
Note
____
If pairing fails, please turn off the headset first and then re-pair according to
steps 1 to 6 mentioned above.
____
If the Bluetooth version of your mobile phone is V2.1 or above, there is no
need to enter the pairing password when the headset pairs with your mobile
phone.
____
After pairing is successful, the headset and the mobile phone will remember
each other, and there will be no need to re-pair next time.
____
Every time the headset is turned on, it will automatically connect to the last
connected device. If you want to pair it with other devices, please turn off the