Novell ZENWORKS 10 ASSET MANAGEMENT SP3 - MIGRATION GUIDE 10.3 23-03-2010, Manual

Page: 7 / 48

About This Guide 7
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
About This Guide
This Novell ZENworks 10 Asset Management Migration Guide includes information to help you
successfully migrate selected inventory and asset management data from ZENworks
®
Asset
Management 7.5 to an installed Novell
®
ZENworks 10 Asset Management system
The information in this guide is organized as follows:
Š
Chapter 1, “Using the Migration Utility,” on page 9
Š
Chapter 2, “Migration Console Reference,” on page 29
Š
Appendix B, “ZENworks Objects and Their Uniqueness,” on page 41
Š
“Glossary” on page 47
Audience
This guide is intended for ZENworks administrators.
Feedback
We want to hear your comments and suggestions about this manual and the other documentation
included with this product. Please use the User Comments feature at the bottom of each page of the
online documentation, or go to the
Novell Documentation Feedback site (http://www.novell.com/
documentation/feedback.html) and enter your comments there.
Additional Documentation
ZENworks 10 Asset Management is supported by other documentation (in both PDF and HTML
formats) that you can use to learn about and implement the product. See the
ZENworks 10
Configuration Management documentation (http://www.novell.com/documentation/zcm10/
index.html)
.
Documentation Conventions
In Novell documentation, a greater-than symbol (>) is used to separate actions within a step and
items in a cross-reference path.
A trademark symbol (
®
,
TM
, etc.) denotes a Novell trademark. An asterisk (*) denotes a third-party
trademark.
When a single pathname can be written with a backslash for some platforms or a forward slash for
other platforms, the pathname is presented with a backslash. Users of platforms that require a
forward slash, such as Linux*, should use forward slashes as required by your software.