Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE 2-23-2010, Administration Manual, Page: 116 / 140

116 SLES 11: Storage Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
2 Click the Discovery Domains Set tab.
3 Select Create Discovery Domain Set to add a new set to the list of discovery domain sets.
4 Choose a discovery domain set to modify.
5 Click Add Discovery Domain , select the discovery domain you want to add to the discovery
domain set, then click Add Discovery Domain .
6 Repeat the last step for as many discovery domains as you want to add to the discovery domain
set, then click
Done .
A discovery domain can belong to more than one discovery domain set.
12.4 Starting iSNS
iSNS must be started at the server where you install it. Enter one of the following commands at a
terminal console as the
root
user:
rcisns start
/etc/init.d/isns start
You can also use the
stop
,
status
, and
restart
options with iSNS.
iSNS can also be configured to start automatically each time the server is rebooted:
1 Start YaST and under Network Services , select iSNS Server .
2 With the Service tab selected, specify the IP address of your iSNS server, then click Save
Address .
3 In the Service Start section of the screen, select When Booting .
You can also choose to start the iSNS server manually. You must then use the
rcisns start
command to start the service each time the server is restarted.
12.5 Stopping iSNS
iSNS must be stopped at the server where it is running. Enter one of the following commands at a
terminal console as the
root
user:
rcisns stop
/etc/init.d/isns stop
12.6 For More Information
For information, see the Linux iSNS for iSCSI project (http://sourceforge.net/projects/linuxisns/) .
The electronic mailing list for this project is Linux iSNS - Discussion (http://sourceforge.net/
mailarchive/forum.php?forum_name=linuxisns-discussion) .
General information about iSNS is available in RFC 4171: Internet Storage Name Service (http://
www.ietf.org/rfc/rfc4171) .