Novell LINUX ENTERPRISE DESKTOP 10 - IPRINT CLIENT, Manual

Page: 10 / 14

10 SUSE Linux Enterprise Desktop iPrint Client User Guide
no
vd
ocx (
E
NU)
01
F
ebr
ua
ry
200
6
1.3.1 Requirement
‰ In order for iPrint to work properly, your workstation needs to have a Mozilla-based browser
such as Firefox, which is included with SLED. If it is not already installed, KDE users should
use YaST to install Firefox.
1.3.2 Procedure
You can install the iPrint Client during SLED installation or using YaST after SLED is installed.
• “Installing during SLED Installation” on page 10
• “Installing after SLED Installation” on page 10
Installing during SLED Installation
Shortly after the installation program begins, you can choose to install the iPrint client using the
following steps. You can also install the client later using the YaST Control Center.
1 After selecting your preferred desktop, scroll down the list of Installation Settings and click
Software .
2 Click Detailed Selection .
3
Change the Filter to Search , and search for iPrint,
4 Select the iPrint Client you want installed.
For more information about the iPrint Linux Client, see
Section 1.1.2, “iPrint Client,” on
page 7 or contact your network administrator.
5
(Optional) Search for and select CASA (Common Authentication Service Adapter).
CASA retains your username and password for printers that require authentication.
6 Click Accept .
Installing after SLED Installation
1 Start YaST.
• GNOME: Click Computer > More Applications > System > YaST Control Center .
• KDE: Click the main menu button > System > YaST (Control Center) .
2 Search for iPrint.
3 Select the iPrint Client you want installed.
For more information about the iPrint Linux Client, see
Section 1.1.2, “iPrint Client,” on
page 7 or contact your network administrator.
4 (Optional) Search for and select CASA (Common Authentication Service Adapter).
CASA retains your username and password for printers that require authentication.
5
Click Accept .