Novell GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION, Manual

Page: 69 / 75

Merging the GroupWise Systems 69
no
vd
ocx (
E
NU)
10
Au
gu
st
200
6
2
Right-click GroupWise System in the GroupWise View, then click New > External Domain to
display the Create External GroupWise Domain dialog box.
3 Fill in the fields:
Domain Name: Enter the name of the Site #2 domain you are connecting to ( worksheet item 5
and worksheet item 10 ). Names are not case sensitive.
Domain Database Location: Select the path to the Site #2 domain database (
wpdomain.db
)
you are connecting to. ConsoleOne interprets a mapped location as a UNC path ( worksheet
item 15 ).
Time Zone: Select the time zone where the external domain is physically located ( worksheet
item 17 ).
Version: Select the database version for the Site #2 domain. The version is determined by the
domain’s MTA version.
Link to Domain: Select the domain in your system you want the external domain linked to.
The MTA for the Site #1 domain you specify will route messages to and from the external
domain (
worksheet item 14 and worksheet item 18 ).
4 Click Create to create the external domain and add it to the GroupWise View.
5 Repeat Step 2 through Step 4 for every Site #2 external domain you need to create ( worksheet
item 5 and worksheet item 10 ).
11.2 Configuring Links Between Site #2 Domains
and Site #1 Secondary Domains
If you selected No under worksheet item 12 , configure the links between each Site #2 domain and all
of the secondary domains in Site #1 ( worksheet item 13 ).
See “ Managing the Links between Domains and Post Offices ” in “ Domains ” in the GroupWise 7
Administration Guide for information on setting up direct links between domains.
11.3 Checking Links to External Domains for
Both Systems
The merge cannot be performed if there are broken or missing links. Therefore, you should check
the links in Site #1 and check the links in Site #2.
Refer to the appropriate section for instructions:
Š
“Checking Links to Site #1 External Domains in Site #2” on page 70