Novell CLIENT FOR LINUX 2.0 SP1 - ADMINISTRATION, Administration Manual

Page: 46 / 89

46 Novell Client 2.0 SP1 for Linux Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
2 If you are not logged in as
root
, type the
root
password, then click Continue .
3 Click Software in the left column, then click Software Management in the right column.
4 Click Search in the Filter drop-down list.
5 In the Search field, type the name of the package you want to install, then click Search .
6 Select the package for installation.
7 Repeat Step 5 and Step 6 for each package that you want to install.
8 Click Accept to install all of the selected packages.
YaST displays the progress of the package installation.
9 (Conditional) If a message informs you that other package selections have been made to
resolve dependencies, click
Continue .
10
(Conditional) If a message prompts you to insert a CD, put the CD in the CD drive, then click
OK .
11 After all the packages have been installed, click Close to close the YaST Control Center.
A.2 Compiling the Novell Client Virtual File
System Kernel Module
Depending on whether or not you have a standard kernel that has been updated or a custom kernel
that needs to have the Novell Client Virtual File System Kernel Module added, the steps for
compiling the module differ.
Š
Section A.2.1, “Compiling the Novell Client Virtual File System Kernel Module After a Kernel
Update,” on page 46
Š
Section A.2.2, “Compiling the Novell Client Virtual File System Kernel Module on
Workstations Running a Custom Kernel,” on page 47
A.2.1 Compiling the Novell Client Virtual File System Kernel
Module After a Kernel Update
If you have updated the kernel on the workstation, you must compile the Novell Client Virtual File
System Kernel Module so that it works with the updated kernel.
1
In a terminal, log in as
root
.
2 Enter the following command:
cd /opt/novell/ncl/src/novfs
3 Enter the following command:
./mk_novfs
The Novell Client Virtual File System Kernel Module is updated to match your updated kernel.