Novell Access Manager 3.1 SP 2, Manual, Page: 43 / 126

Installing the J2EE Agents 43
n
ov
do
cx (e
n)
16
Ap
ril 20
10
The agent imports into the Access Manager Administration Console when the WebLogic server
starts.
14
(Optional) Do the following to verify and test the installation:
Š
To verify that the agent is installed, see Section 1.8, “Verifying If a J2EE Agent Is
Installed,” on page 43 .
Š
To test the agent, see Chapter 7, “Deploying the Sample Payroll Application,” on page 95 .
15 Continue with Chapter 2, “Configuring the Agent for Authentication,” on page 45 to configure
the J2EE Agent.
1.8 Verifying If a J2EE Agent Is Installed
You can verify the installation of the agent by using the Administration Console.
1 In the Administration Console, click Devices > J2EE Agents .
If the installation was successful, the IP address of your agent appears in the Server list. The
import into Administration Console can take a few minutes, so if your agent does not appear in
the list, wait a few minutes, then refresh the screen.
If an agent starts to import into the Administration Console but fails to complete the process,
the following message appears:
Server agent-<name> is currently importing. If it has been several minutes
after installation, click repair import to fix it.
If you have waited at least ten minutes, but the message doesn’t disappear and the agent doesn’t
appear in the list, click the
repair import link. If the agent isn’t in the list and you don’t receive
a repair import message, verify that you have restarted the J2EE server after installing the
agent. The J2EE server must be running for the import process to begin. For additional help,
see
Section 9.1, “Troubleshooting the J2EE Agent Import,” on page 119 .
2 The agent must be configured before the Server Status turns green. See Chapter 2,
“Configuring the Agent for Authentication,” on page 45 .
1.9 Uninstalling a J2EE Agent
1 Browse to
<agent Install folder> \Novell Access Manager J2EE
Agents\Uninstall_Novell Access Manager J2EE Agents
2 Double-click the uninstaller.
3 Click Next in the Uninstall J2EE Agents page.
4 Select one of the following options in the Uninstall Options page:
Š Complete Uninstall: This removes all the features and files that were installed during the
installation.
Š
Uninstall Specific Features: This allows you to select the features that you want to
uninstall.
5 (Optional) If you selected the Uninstall Specific Features option, select the features that you
want to uninstall.
6
Click Uninstall .
7 Click Done to complete the uninstallation procedure.