N'oveen SB210, Additional Safety And Use Instructions, Page: 11 / 24

11
- Place the container (C) on a flat, horizontal surface with the hole facing upwards.
and enter the ingredients you want to use by cutting them into small pieces if it is
necessary. Do not exceed the maximum level marked on the container.
- Place the blade set (E) in the container opening (C) and turn clockwise to latch.
(Fig. 2).
- Place the container (C) upside down and place it in the socket (A) on the base (B),
making sure that the arrows on the base match the arrows on the blade set (E) (Fig. 3).
- Connect the device to the power supply.
- Press the button on the front of the device (F), the blender will start working and it will
work as long as the button remains pressed.
- After use, remove the plug from the socket and wait until the blades come to a standstill
before using it before removing the container (C) from the base (B).
- Place the container (C) upright and place it on a flat surface. To open the container,
unscrew the blade set (E).
- Pour the contents into a glass or mount the lid (D) on the container (C) to carry it
separately (Fig. 5).
- Wash the container (C) after use.
NOTE
Prepare the food to be processed, place it in a container (C) and close it correctly with the
balde set (E) before mounting it to the base (B), then connect the device to the mains
power supply. Otherwise there is the risk of accidental operation of the device.
Caution: blades are sharp.
Do not leave the appliance in continuous operation for more than 30 seconds.
Short pulses for a few seconds are suitable.
Never place hot liquids or fruits with seeds inside the container (C), this can damage the
blades.