6.3.2 Moving the excavator by using the memory function
When measuring depth, the excavator can be moved by using the memory function. Switch on the
memory function from “Main menu” → “Display unit” → “Buttons” and press the “OK” button on the
“Memory” selection. Measure the depth normally (Figure 32). In this example, the bucket has been
zeroed on the stake with a “Starting level” value of “0.00”.
Before moving the excavator, move the bucket to a fixed point (for example a stone). Store the
altitude of the fixed point into the memory by pressing the “Power” button (Figure 33). The text
”MEMORY” will appear on the screen and the memory function is activated.
Move the excavator to a new place and move the bucket to the same fixed point. Release the
stored height value by pressing the “Power” button again (Figure 34). The “MEMORY” text will
disappear.
Xsite EASY | User manual | Page 35 of 52
Figure 33. Activating the memory function
Figure 32. Measure depth normally
Figure 34. Moving the machine to a new place