Novatest NOVASCAN-C310A Operation Manual Download Page 5

Page: 5 / 72

Chapter 1 General introduction

1.1 Brief introduction

NOVASCAN R630A tests the thickness of concrete cover, rebar diameter,

location and space.

NOVASCAN-C310A tests the degree of rebar corrosion and distribution.

NOVASCAN-R800 Multifuncional Rebar Detector - a portable, integrative

and multifunctional on ecombines the functions of both NOVASCAN R630A

scanner for rebar test and NOVASCAN detector for rebar rust test.

1.2 Major functions and characteristics

1.2.1 Major functions

Double f uncti on of re bar and rust test.

Identify rebar loc ation, directi on and di stribution.

Test the thickness of concrete cover.

Test rebar diamete r.

Qualif y the thickness of concrete cover automaticall y.

Single-electrode testing of concrete rebar corrosion.

Double-electrode testi ng of concrete rebar corros ion.

Divi de rebar corros ion in maxi mal 10 gray shades or color

graphs.
9.

Test data storage, check and transmission.

10. A nalyze prof essionall y with Test Data Processing Soft ware.

Operation manual of NOVASCAN-R800, R630, C310A

Novatest S.r.l.

www.novatest.it

Summary of Contents for NOVASCAN-C310A









































































Search results

Summary of Contents for NOVASCAN-C310A

Reviews:

Novatest NOVASCAN-C310A, Operation Manual, Page: 5 / 72

Search results

Summary of Contents for NOVASCAN-C310A

Reviews: