Novatel ProPak6, User Manual

Page: 115 / 130

ProPak6 Installation and Operation User Manual Rev 4 115
A.3.1 ProPak6 Port Pin-Outs
Table 14: COM1 and COM2 Port Pin-Out Descriptions
Refer to Figure 7, Ethernet, COM or USB Device Ports on page 24.
Table 15: COM3/IMU Port Pin-Out Description
Refer to Figure 7, Ethernet, COM or USB Device Ports on page 24.
Connector Pin No. RS-232 Mode RS-422 Mode
1 N/C N/C
2 RXD RX(+)
3 TXD TX(+)
4 Vout
Vout
a
a. Can be turned on or off using the
COMVOUT
command. Refer to
the OEM6 Family Firmware Reference Manual (OM-20000129)
for more information.
5 GND GND
6 N/C N/C
7 RTS TX(-)
8 CTS RX(-)
9 N/C N/C
Connector Pin No. RS-232 Mode RS-422 Mode
1
a
a. The IMU_EVENT_OUT(SYNC)1 signal can be disabled.
IMU_EVENT_OUT(SYNC)1 IMU_EVENT_OUT(SYNC)1
2 RXD RX(+)
3 TXD TX(+)
4 N/C N/C
5 GND GND
6 N/C N/C
7 RTS TX(-)
8 CTS RX(-)
9 reserved reserved