Novatel MarinePak7 Quick Start Manual Download Page 6

Page: 6 / 8

4. If using two GNSS antennas with the MarinePak7, use a second coaxial

cable to connect the secondary GNSS antenna to the

GNSS2

TNC

connector.

5. Connect the Wi-Fi antenna to the Wi-Fi port on the front of the MarinePak7.

6. Connect the 12V DC power supply to the 4 pin

connector on the back of

the MarinePak7 and then connect the power supply to the mains outlet.

Once power is detected the MarinePak7 will automatically detect the charge
state of the internal lithium battery and begin recharging.

7. Briefly press the

button on the front of the MarinePak7 to power up the

receiver.

When the receiver is ready for normal operation the UI screen displays the
Position Status (Home) screen.

For more information about MarinePak7 installation and configuration, refer to the

MarinePak7 User Manual

Summary of Contents for MarinePak7

Page 3: ...er Figure 1 MarinePak7 Connectors Label Connector Type Description GNSS1 TNC Primary GNSS antenna GNSS2 TNC Secondary GNSS antenna GSM SMA GSM cellular modem antenna UHF TNC UHF radio antenna DC 4 pin LEMO Receiver power supply RJ 45 Ethernet network COM 1 DB9 Male RS 232 RS 422 serial port Table 1 MarinePak7 Connectors 3 ...

Page 4: ...rial port PPS SMA Pulse Per Second PPS output I O 12 pin LEMO Input and output signals l PPS Pulse Per Second output l EVENT Input l EVENT Output Screw Terminal Receiver grounding point USB Type A USB Host connector SMA Wi Fi antenna The USB and Wi Fi antenna connectors are on the front of the MarinePak7 4 ...

Page 5: ...nePak7 Configuration Example 1 Mount the GNSS antennas user supplied on a secure stable structure with an unobstructed view of the sky from horizon to horizon 2 Mount MarinePak7 in the desired location 3 Use a coaxial cable to connect a GNSS antenna to the GNSS1 TNC connector on the MarinePak7 5 ...