2
2. Align the mount thread with the metal adapter on the bottom of the antenna and rotate the antenna
clockwise until it is securely screwed to the mount. Using a wrench, tighten the adapter to the mount.
3. Remove the dust cap from the antenna’s TNC connector.
4. Attach the male TNC connector of the coaxial cable to the antenna’s TNC connector.
5. Attach the other end of the coaxial cable to the antenna input port of the receiving device.
The receiving device must provide power as detailed in the
SPECIFICATIONS
section of this guide. All
NovAtel GNSS receivers provide the necessary power through their antenna RF connectors.
ANTENNA CARE
The GPS-703-GGG is designed to withstand the elements, including rain, snow and dust. However, to
ensure your antenna performs optimally, keep the radome (the top surface of the antenna) clean and brush
off any ice and snow. In addition, ensure the TNC connector remains clean and dry and replace the dust
cap when a cable is not connected.
The metal adapter on the bottom of the antenna is fixed in place. Do not attempt to remove it.
5/8 x 11
thread
"
3/8 - 7/8 9 - 22 mm
"
" (
)
Mount
Metal
adapter
Jam nuts
or flange
TNC connector
Coaxial
cable
Summary of Contents for GPS-703-GGG
Page 3: ...3 ELEVATION GAIN PATTERN...
