Novatel 2352, User Manual

Page: 15 / 108

9
WiFi Mode Setup
To properly set up your device for WiFi mode, you need to do both of the following tasks:
•
Set Up a WiFi Connection
•
Set Up Wireless Security
IMPORTANT:
You will need the Access Point Name (APN) from your service provider plus any
username, password, or other information they may have given you.
Set Up a WiFi Connection
Setting up the WiFi connection requires two steps:
•
Connect to MiFi
•
Configure MiFi for your service provider
➤ The battery should be fully charged before using MiFi the first time.
➤
To connect in WiFi Mode, MiFi must be powered with a charged battery or
with an AC mains or car charger. When MiFi is connected to your computer
with the USB cable, WiFi is disabled.
NOTE:
Connect to MiFi:
➊
Press the power button .
MiFi powers on and starts up . When the power LED is solid amber and the WiFi LED solid
blue, the device is ready to connect .
➋
Use your normal WiFi manager on your computer to locate the MiFi wireless network .
The steps to connect to a WiFi network vary depending
on your operating system and whether you use the native
application or third-party software.
Tip!