PLACING TOOL IN SERVICE
Always install, operate, inspect and maintain
this product in accordance with all applicable
standards and regulations (local, state, country,
federal, etc.).
Compressed air models always use clean, dry
air at 90 psi (6.2bar/620kPa) maximum air
pressure at the inlet. Higher pressure may
result in hazardous situations including
excessive speed, rupture, or incorrect output
torque or force.
Electric models must always utilize proper
gauge, and rated electrical cords with correct
connections.
Be sure all hoses and fittings are the correctly
sized and secured.
Ensure an accessible emergency shut off has
been installed in the air or electrical supply line.
Make others aware of its location.
Do not use damaged, frayed, or deteriorated air
hoses and fittings.
Always use proper gauge electrical cords with
correct connections. (When applicable.)
Electric models must not use damaged, frayed, or
deteriorated electrical cords and connections.
Keep clear of whipping air hoses. Shut off the
compressed air before approaching a whipping
hose.
Always turn off and disconnect the tool from its
power supply before installing, removing or
adjusting any accessory, or before performing
any maintenance on the tool.
Do not lubricate tools with flammable or volatile
liquids such as kerosene, diesel or jet fuel. Use
only recommended lubricants.
Keep work area clean, uncluttered, ventilated and
illuminated.
Keep all electrical connections clear of water or
other liquids. (When applicable.)
Do not operate the machine while flammable or
volatile liquids such as gasoline, diesel or jet fuel
are present. Failure to do so can result in
explosion. (When applicable.)
Do not remove any labels. Replace any damaged
label.
USING THE TOOL
Always wear protection when operating or
performing maintenance on this tool.
Always wear hearing protection when operating
this tool.
Always use Personal Protective Equipment
appropriate to the tool used and material
worked. This may include dust mask or other
breathing apparatus, safety glasses, ear plugs,
gloves, apron, safety shoes, hard hat and other
equipment,
Prevent exposure and breathing of harmful dust
and particles created by power tool use:
-
Some dust created by power sanding, sawing,
and grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
-
Lead from lead based paints,
-
Crystalline silica from bricks and cement and
other masonry products, and
-
Arsenic and chromium from chemically treated
lumber
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
Keep others a safe distance from your work
area, or ensure they use appropriate Personal
Protective Equipment.
This tool is not designed for working in
explosive environments, including those
caused by fumes and dust, or near flammable
materials.
Electrically powered tools are not insulated
against electric shock.
Be aware of buried, hidden or other hazards in
your work environment. Do not contact or
damage cords, conduits, pipes, or hoses that may
contain electrical wires, explosive gases or
harmful liquids.
Keep hands, loose clothing, long hair and jewelry
away from working end of tool.
Power tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions
may be harmful to your hands and arms. Stop
using any tool if discomfort, tingling feeling or
pain occurs. Seek medical advices before
resuming use.
Keep body stance balanced and firm. Do not
overreach when operating this tool. Anticipate
and be alert for sudden changes in motion,
reaction torques, or forces during startup and
operation.
Tool and/or accessories may briefly continue their
motion after throttle is released,
To avoid accidental starting
– ensure tool in “off”
position before applying air pressure or
connecting to electricity. Avoid throttle when
carrying, and release throttle with loss of air or
electricity.
Ensure work pieces are secure. Use clamps or
vises to hold work piece whenever possible.
Do not carry or drag the tool by the hose or power
cord.
Do not use power tools when tired, or under the
influence of medication, drugs, or alcohol.
Never us a damaged or malfunctioning tool or
accessory,
Do not modify the tool, safety devices, or
accessories.
Do not use this tool for purposed other than those
recommended.
Use accessories recommended by Novatek Corp.
Summary of Contents for SRAT5A
Page 1: ......
Page 9: ...9 RIGHT ANGLE AIR MOTOR SUB ASSEMBLY Part No SRATARA5...
