~ 7 ~
NOVATEK-ELECTRO
EM-129
Launch a Web browser on the electronic device (Chrome, Opera,
Fire Fox, etc.).
In the address bar of the browser, enter “http://em.com” or
“http://192.168.4.1” and follow the entered link.
Web-based interface of meter EM-129 will open on the screen of the
electronic device (see Figure 4).
Set up Wi-Fi connection by selecting your network and entering a
password:
Service Set IDentifier (SSID)
– name of your Wi-Fi network;
Password of the network
– password of your Wi-Fi network;
TCP/IP setup
– setup of IP address, subnetwork mask and
gateway address (by default it is configured automatically);
MAC address
- a unique device address;
Device password
- used when connecting to the device remotely
(default is “admin”).
To save the settings, click the "Next" button.
Fig. 4
– Wi-Fi setup
Upon completion of saving the settings, a message on the
successful saving will be displayed on the screen of the electronic
device.
Wait for connection of EM-129 to the specified Wi-Fi (the status
condition indicator will stop flashing often in blue), and follow the link in
the form of a green button at the bottom of the screen (see Fig. 5).
Notes:
1 -
if the status condition indicator is constantly flashing blue, check
the Wi-Fi network and repeat the Wi-Fi connection settings (see
paragraph 3.4.1);
2 - if the link does not appear for some time (20 - 30 s), check the
connection of the electronic device to the global Internet
Fig. 5
– connection to “my.overvis.com”
After clicking on the link, the main interface of the EM-129 will be
displayed on the screen of the electronic device (see Figure 6).
For subsequent access to your device, use the "my.overvis.com"
service.
Note:
We strongly recommend to create an account on the site
“my.overvis.com”, this will allow you to have a safe access to your
devices and manage the list of connected devices.
Fig. 6
– interface of EM-129