NOVATECH ApS - Skudehavnsvej 30 - DK 9000 Aalborg. P.O.Box 540
Tel. +45 98 16 50 09 Fax +45 98 16 80 97 [email protected]
8
3.
Safety
This section contains general safety instructions for supplied machine. This manual should
be reviewed very carefully by all persons working on or with supplied machine.
Conditions
REMEMBER: YOU are the best to prevent YOU from getting injured if you think about
it before you come near the machine.
You should think about your own safety first. Various errors must be corrected as soon
as possible
.
Operators should think twice before they do anything with the machine not to get
injured.
Machine should not be started until the operator is satisfied that there are no persons
or unwanted things close by, in or on the machine and start-up can be done without
risk to life and injury and damage to the machine
.
There are not always more persons in the immediate vicinity, so it requires that operators
are extra careful in their use since help is not in the immediate vicinity.
General safety instructions for maintenance personal.
Maintenance and service personnel must remember to disconnect the power supply
for machine, when maintenance, repair works, troubleshooting, cleaning etc are performed
.
Put a sign on the machine indicating that "Do not start, work in progress" and "This energy
source is locked." The service worker writes his name on the sign, so the third party can see
who is working on the machine
.
As long as the desired power is connected, it is incumbent for the service employees to make
sure that others cannot get injured by / in / on machine.
After repairs, troubleshooting etc. is completed, the service employees ensure that
all connections, guards etc. are properly installed, secured and connected before the machine
is start up again.
CAUTION
Risk of injury
Read the instructions
