NOVATECH INSTRUMENTS
4210 198th St. SW #204
Lynnwood, WA 98036
USA
2940A Manual Rev 1.0
http://www.novatechsales.com
Note 3:
The Factory Default menu settings are:
1) Serial Baud Rate = 9600,
2) Remote Echo = On,
3) User Interface = Local,
4) Power Up Mode = Save Settings
5) External Standard = Disabled.
A 10MHz reference should be connected to the rear BNC before changing the External
Standard setting from Disabled to another setting. The frequency accuracy of the 2940A is
degraded when operating with an External Standard setting other then Disabled when no
External Standard is connected.
Note 4:
The SOF8 CD included with the 2940A contains an application named SOF8_1940A that
can be used to control the 2940A. The 1940A is a rack mount instrument that contains
two 2940A. The SOF8_1940A software supports two COM ports. It is recommended that
only one of these ports be given a valid COM port number when using this software with
the 2940A.
