14
15.0 NovaTouch™ CONTROL
15.1 System Conventions:
All information and data displays will appear two dimen-
sional in configuration and flat. All data entry points or
operational features will appear three dimensional in
configuration and raised or depressed in appearance
depending on their operational position.
Numerical Entries:
When you touch an IO field on
the HMI device touch screen that requires only a
numerical entry (Password, Temperature, number of
seconds etc.) the following keyboard will appear.
Alpha/Numeric Entries:
When you are prompted to
enter alphabetical and numerical data (Resin Names/
Numbers) this screen will appear:
Proceed as follows:
1. Touch the relevant IO field on the screen.
The numerical screen keyboard opens and displays the
current value.
2. Set the value.
You can only operate keys which are visualized in 3D for-
mat. The type of value to be entered determines whether
a key is enabled or disabled.
The following options for entering values are available:
The current value is deleted when you enter the first
character. Enter the value again.
Use the
and
keys to move the cursor within the
current value. You can now edit the characters of the
current value or add characters.
Use the
key to delete the character to the left of the
cursor.
Use the
key to change the sign of the value.
Select
to view the info text of the IO field.
Select
to confirm your entries or cancel them with
.
Both actions close the screen keyboard.
Summary of Contents for NovaWheel NWB- DC+ Series
Page 7: ...7 4 0 BASIC COMPONENTS OF NOVATEC NWB DC DRYER ASSEMBLY ...
Page 15: ...15 15 2 Screen Map For all processor operations ...
Page 30: ...30 ...
Page 31: ...31 ...
