8 of 13
SCU-DVR3-4 Manual
Revision: 2 - Date: 24-01-2022
Basic Controls
Below you find some of the basic controls that are on almost all panels.
Power button
ON
Press and hold for 1 second to start up the system. This will start up
both the DVR3 and the xDR
OFF
Press and hold for 1 second to shut down the system. This will shut
both the DVR3 and the xDR down.
Battery indication
This LED shows the battery status. Blinking means that is working on battery.
Solid means that it is connected to an external power source.
Battery
External power
50-100%
Blinking Green
Solid Green
25-50%
Blinking Yellow
Solid Yellow
0-25%
Blinking Red
Solid Red
Rackmount units
The SCU-DVR3-4 is best combined with other Novasub rackmount units. How to connect these units to each other can be
seen in the schematic on the next page.
