8 of 18
SCCW-2DRVL-DSP-DVR3-DDG-G4.0.x Manual
Version: 1.0 - Date: 27-11-2020
Basic Controls
Below you find some of the basic controls that are on almost all panels.
Power button
ON
Press and hold for 1 second to start up the system. This will start up
both the DVR3 and the xDR
OFF
Press and hold for 1 second to shut down the system. This will shut
both the DVR3 and the xDR down.
Speaker button
This uses a “Stay put push button”, this means that once you press it, it will
remain in that position.
Speaker ON
Button Pushed in
Speaker OFF Button out
Battery indication
This LED shows the battery status. Blinking means that is working on battery.
Solid means that it is connected to an external power source.
Battery
External power
50-100%
Blinking Green
Solid Green
25-50%
Blinking Yellow
Solid Yellow
0-25%
Blinking Red
Solid Red
Monitor
The SCC is fitted with a daylight readable touch monitor. The monitor is waterproof against little waterdrops.
The monitor is fitted with a light sensor in the top left corner. The sensor react on the ambient light and regulates
automatically the monitor back-light. If the ambient light increases the back light also increases, For example when you
use it outside.
Light sensor
