www.novastar.tech
-5-
: Output port (Ethernet port 2 is used for output)
: All the buttons and knob are locked.
③: Knob
Press the knob to enter the operation menu screen.
Rotate the knob to select a menu item or adjust a parameter.
④: ESC button
Press the button to exit the current menu or cancel the operation.
⑤: 8 input source buttons
Press the button to set the input source of main layer. Hold down the button to set
the input source of PIP. The setting result can be viewed on the operation screen.
In the above figure, the input source of main layer is VGA1 and the input source of
PIP is HDMI.
⑥: Fn button for entering the related menu screen
⑦: Shortcut button for loading preset
2.2
Rear Panel
Note: To improve user experience, the connector layout may be adjusted. Product
images in this document are for reference only.
Input
