NovaPro UHD Jr All-in-One Controller
User Manual
5 Menu Operations
www.novastar.tech
15
Step 2 Rotate the knob to select
Layer Settings
and press the knob to enter the layer
settings screen where you can set the followings.
Main layer
PIP
Layout
BKG
5.3.1 Main Layer and PIP
Menu
Description
Status
The status of the selected layer:
On
and
Off
Note: Press the
PIP
button in
FUNCTION
area on the device front
panel to enter the PIP settings screen and turn on the PIP.
Input
Source
The input source of the layer
Note: Press the input source button in
SOURCE
area on the device
front panel to select the input source for the main layer, and hold
down the button to select the input source for the PIP.
Scaling
Mode
The options are
Full Screen
,
Pixel to Pixel
and
Custom
.
H Width
The horizontal width of the layer
The default value for the main layer and PIP is 1920 and 800
respectively. The range is 64
–32768.
V Height
The vertical height of the layer
The default value for the main layer and PIP is 1080 and 600
respectively. The range is 64
–32768.
Initial X
The initial horizontal coordinate of the layer
Initial Y
The initial vertical coordinate of the layer
Input Crop
The function of cropping the input source image and displaying it in
full screen
Status: You can turn on or turn off this function for the selected
layer.
H Width: The horizontal width of the current input source. If no
input source is detected, the default value is 1920.
V Height: The vertical height of the current input source. If no input
source is detected, the default value is 1080.
Initial X: The horizontal initial coordinate of the cropped part upon
the current input source. The range is 0
–horizontal width of input
source and the default value is 0.
Initial Y: The vertical initial coordinate of the cropped part upon the
current input source. The range is 0
–vertical height of input source
and the default value is 0.
Priority
The layer priority. The options are
1
and
2
.
1: Send the layer to the back.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
