PRECESSION ELEPHANT 2 Scan Head 2
7 Operating
7.1 Audience and qualification
Operating the scan head is only allowed for personnel trained in operating the scan
head, i.e. the machine where it is incorporated.
7.2 Safety precautions
The safety precautions for operation depend on the machine where the scan head is
incorporated. Please refer to the documentation for this machine.
7.3 Control and signaling by the InScript software
At the scan head during normal operation neither there are controls that have to be
handled manually nor there are optical or acoustical signals that could be observed.
The scan head is controlled by the InScript software and signaling is done via the
InScript software.
Read the InScript and Firmware documentation relevant for operation
•
General description of the InScript software [
•
General procedures about how to use the InScript software [
•
Specific usage of job nodes in the InScript software that are supported by the
ASC system controller [
Job nodes relevant specifically for the PRECESSION ELEPHANT scan head:
o
Job nodes: Drawing
Precession Drill
•
Specific description of devices supported by the ASC system controller as well as,
their configuration and usage in the InScript software [
63
