29
FIBER_TIGER_manual, 2021-11-29
4.
Preparing for use
4.3. Installing
8. Pull and turn the bayonet ring in direction 2; see figure 4.14 on page 29.
9. Attach the fiber to the fiber stress relief.
Figure 4.14.: Connector type of the fiber coupling: Optoskand QBH (here shown with
plugged in fiber)
4.3.8. Do not connect the SAFETY interface
The SAFETY interface is inoperable.
Target audience and qualification
Novanta service personnel
Procedure
• Do not connect anything to the SAFETY interface.
Figure 4.15.: Connector type of the SAFETY interface: RJ12 socket
4.3.9. Do not connect the SERVICE interface
The SERVICE interface is reserved for service purposes only.
