Manual, F/T Sensor, Ethernet Axia
Document #9620-05-C-Ethernet Axia-02
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
C-25
5. Operation
For general operation information about the sensor, refer to the appropriate sensor manual in
5.1 LED Self-Test Sequence
The Ethernet Axia sensor has three LEDs: Sensor Status, Link/Activity, and Diag. When a user applies
power, the sensor completes a self-test, during which the LEDs under firmware control turn-on individually.
Table 5.1—LED Self-Test Sequence
Sequence
Order
LED
State
Duration
0
All
At power on, some transient activity may be seen for only a
few milliseconds.
1
All
Off
Approximately one second
for each state.
2
Status
Red
3
Diag
Red
4
L/A
Red
5
Status
Green
6
Diag
Green
7
L/A
Green
8
All
Off
9
All
Normal Operation
Figure 5.1
—LED Label on the Sensor
