Reference Manual
Page 6
Reference Manual
Page 5
DXI8200
8 CHANNEL CLASS-D AMPLIFIER
DXI8200
8 CHANNEL CLASS-D AMPLIFIER
10. Fan intake grill filter
One grill with foam filter is located on the front panel to prevent dust from entering the
amplifier. For easy cleaning of the filter the grill is removable by simply pulling it off. The foam
filter should always be used. The fan's
variable speed control ensure low noise operation and
adapt the quantity of air required from the actual temperature inside the unit.
Thanks to this advanced system low noise is guarantee. Do not block this intake!
11. Rack mounting ears
Two front panel mounting holes are provided on each mounting ear.
1
2
4
3
3
Rear Panel
1. INPUT connectors
These are balanced input connectors. The included Eurob-lock connectors can be used to
make connections here.
2. MODE switches
These specify the amplifier
s operation mode for each two channels.
STEREO mode
Each channel (A~H) will operate independently.
BRIDGE mode
The amplifiers will be bridged for pairs of adjacent channels (A-B, C-D, E-F, G-H), obtaining a
high-power output.
PARALLEL mode
The input signals will be input to the adjacent channels (A-B, C-D, E-F, G-H) as well.
3. SPEAKERS connectors
These are barrier strip type speaker output connectors.
NOTE
If using BRIDGE mode, connect the speakers to the
+
pin of channels A/C/E/G and
the
-
pin of channels B/ D/F/H.
Do not connect the pin marked NC located in the center of the bottom row of the barrier
strip connectors.
4. AC inlet
Connect this to the socket end of the included AC power cable . Connect the plug end of the
AC power cable to an AC outlet of the correct voltage.
