8
127-0919-001
Press the
<FWD/ REV>
key once and the
LED light will become solidly lit.
Press the green
<ON>
button located on
the lower half of the lathe control panel
when the LED light is solid lit to start the
motor.
Press the red
<OFF>
button to turn the
motor off while running.
➢
Note:
The lathe motor will not turn on when the
<ON>
button is pressed while the LED light
is flashing however, the motor will start immediately after the
<FWD/ REV>
key is pressed.
Switching between Forward and Reverse Modes
The forward and reverse can be switched by
holding down the
<FWD/ REV>
key until the
LED light starts flashing on the alternative line.
Press the
<FWD/ RED>
key once before to
make the LED solidly lit before pressing the
<ON>
button to start the lathe motor
LED solid lit after
pressing <FWD/ REV> key
Press Once
Press to start the
motor when LED is lit
solid
Long Press
Press to stop the
motor while running.
Summary of Contents for COMET 14DR
Page 18: ...15 127 0919 001...
Page 21: ...18 127 0919 001 NOVA COMET 14DR EXPLODED PARTS...
