1. Install monitor as high as possible without loosing the
appropriate viewing angle.
2. Screen should point slightly above user's face (bottom
edge of monitor is nearer to the eye than top edge).
Determine the modification necessary to accomplish the
preferred viewing angle. To make angle adjustments, move
either the top or the bottom Tracking Block assemblies
independently of each other. For oversized monitors, a good
starting point is 11 spaces down in front and 9 spaces down
in back.
Monitor Adjustment
Downward Gaze
™
Monitor Installation
Step 10.2
Once the angle is adjusted, adjust the height by raising or
lowering both upper and lower Tracking Block assemblies
the same number of spaces.
Step 10.3
The bottom of the screen should always be closer to your eyes
than the top.
Step 10.5
After you achieve the desired height and angle, you can fine
tune the viewing distance by sliding the carriage forward and
backward. Each time you make an adjustment, reinsert the
Male Tracking Blocks. When the adjustment is completed,
install the Security Screws.
Step 10.4
S
50-9-2121 Asy. Instr., © Nova Solutions, Inc. 2005
PATENT INFORMATION: Nova products are covered by one or more of the following U.S. patents: Re. 34,266; 4,869,564; 5,125,727; 5,290,099; 5,294,193 & 5,408,939.
Other U.S. and foreign patents issued and pending.
Too Low!
...Monitor is located too
far below surface so that
view is obstructed.
Incorrect Installation
Correct Installation
Page 4
2
Wrong Angle!
...Top of monitor is closer
to the eye than the
bottom of the monitor.
Maximum Monitor Dimensions:
23-1/2"D x 20-1/8"W x 19"H
Specs for 50-9-2121 will accommodate most 21" monitors.
M
TRACKING
BLOCK-F
SECURITY
SCREW
TRACKING
BLOCK-M
LOWER
TRACKING
BLOCK
UPPER
TRACKING
BLOCK
LOWER
TRACKING
BLOCK
UPPER
TRACKING
BLOCK
19"
3"
11"
Keyboard drawer from
edge of top
7-9/16"(1st Stop)
10"(Last Stop)
33"
(838 mm)
25-3/4"
3-5/8"
28"
Min.