②
Warning notes:
◼
Power Supply: AC100V-250V, 50HZ/60HZ.
Make sure the power switch is off, the power plug, outlet and the earth
◼
connection is in well condition before connecting the device with the mains.
◼
Please use qualified power plug and outlet. Never connect the power cord of this device
with other electrical equipment.
◼
During move and installation, make sure the device not crashed with metal parts and other
tough materials.
◼
Always disconnect from the mains, when the device is on installation and dismantled.
◼
The minimum distance between light-output the illuminated surface must be more than
50cm.
◼
The device must only be installed on a non-flammable surface. In order to safeguard
sufficient ventilation, leave 50cm of free space around the device. Please note that heat-
sensitive objects may be deformed and damaged by the emitted heat.
◼
During the operation the housing becomes hot! Don’t operate the device for 15 minutes
after switching off.
◼
The maximum ambient temperature Ta=45°C must never be exceeded. The maximum
housing temperature Tb=80°C must never be exceeded.
◼
For indoors use.
◼
Replace any visible cracked protective shield, filters and lens.
◼
The protective shield, filters and lens will require weekly cleaning as smoke “fluid tends to
building up residues, reducing the light” output very quickly.
➢
INSTALLATION
1.
Installation
◼
When installation, keep the device far away the heat sensitive objects and explosives
sensitive objects, leave at least 50CM of free space around the device.
◼
When the device put on horizontal place, the device must be placed directly on the place,
and device must be secured with a mounting holder.
◼
When rigging the devices on the truss and the head face to the floor. Screw one clamp
each via a M12 screw and nut onto the mounting holder. Insert the quick-lock fasteners of
the first mounting holder into the respective holes on the bottom of the device. Tighten the
quick-lock fasteners fully clockwise. Install the second mounting holder. And the safety
rope must be used at same time.
