Shower frameless 1200 x 900mm Black - Tray
option a option b
Step 5.
If the floor is slightly uneven after repair or levelling you can use a belt
sander to sand down the plastic shower tray feet to obtain level footing.
Underneath the shower tray apply adhesive onto feet then install the tray
against the floor plate and solid fixing as per
Step 6. Install the shower tray into place then leave for 24hours to allow the
adhesive to cure.
Step 7. It
'
s recommended to cut and install suitable new wall board
s
such as
GIB
Aqualine®
. Ensure the
GIB Aqualine®
has a 10mm gap from the top of the
shower tray and
f
loor.
For f
urther instructions please visit
https://www.mitre10.co.nz/guides-and-
advice/guide/how-to-install-a-shower-enclosure
4
option a or option b
