S
R
Q1. Can I get a massage on my back only?
After pressing the kneading massage button, press the Full-body massage
button and press it again when the massage balls reach the targeted area.
Then the massage balls will be fixed.
Q2. Is it possible to adjust the tension?
You can adjust the tension using the hexagon wrench provided at the time
of installation.
Insert a hexagon wrench into the hole located in the center of the four-foot
support at the bottom of the massage chair, and rotate it.
*See tension adjuster on page JK.
Q3. How far does the chair lean back?
It reclines to 119 degrees, from its default angle (104 degrees). When putting
your feet on the ottoman, it will naturally become inclined due to the
weight. (Reclining degree cannot be fixed)
Q4. I can’t connect to the Bluetooth Speaker.
Turn the power off and on again. Then delete 'Nouhaus' on the device and
reconnect it.
*Bluetooth can be connected to only one device at a time.
Q5. Will it create a lot of inter-floor noise?
Unlike other massage chairs, it barely creates any inter-floor noise because
the main body is not attached to the floor.
In addition, you can further reduce the noise by placing a rug under the
massage chair.
Q6. The operating sound seems louder than expected.
In a relatively quiet residential space, you may hear the machine sound
when operating the massage chair, but this is normal and not a cause for
concern.
FAQ
08