Notifier NFS-3030/E, Programming Manual

Page: 49 / 144

Point Program Program
NFS-3030 Programming Manual P/N 51345:C 11/4/03 49
Add Point/ Zone
Figure 3.40 Add Logic Point/Zone Screen
The cursor will be present in the logic equation. Place it, using the arrow keys on the keyboard, at
the place where the additional point should be inserted.
Soft Keys
POINT SELECT:
Press to scroll through the list of possible formats (detector, module, etc.). Stop
at the desired format. Type in the address for the additional point.
ACCEPT:
Press to insert the point into the equation where the cursor is blinking, and to return to
the previous screen.
NEXT/PREVIOUS POINT:
Press these soft keys to scroll forward or backward from the
displayed point to the next installed point.
Add Logic Function
This screen appears when the
ADD LOGIC FUNCTION
soft key is pressed at the Logic Zone
Programming Menu screen.
.
Figure 3.41 Add Logic Function Screen
The cursor will be present in the logic equation. Place it, using the arrow keys on the keyboard, at
L O G I C Z O N E P R O G R A M M I N G M E N U
L O G I C Z O N E Z L x x x x
A U T O M A T I C O F F
A N D ( Z 2 0 , O R ( L 2 D 1 5 9 , L 2 D 1 4 ) )
P O I N T S E L E C T :
L 0 1 D 0 4 3 ( D E T E C T O R )
N E X T P O I N T A C C E P T
P R E V I O U S P O I N T B A C K
L O G I C Z O N E P R O G R A M M I N G M E N U
L O G I C Z O N E Z L x x x x
A U T O M A T I C O F F
A N D ( Z 2 0 , O R ( L 2 D 1 5 9 , L 2 D 1 4 ) )
L O G I C F U N C T I O N : A N D A C C E P T
B A C K
www.PDF-Zoo.com