CAB-3/CAB-4 Series Cabinets Product Installation Document —
P/N LS10244-000GE-E:A 10/13/2021
5
4.
Mark the lower holes, remove the backbox from the wall and drill the mounting holes.
5.
Mount the backbox, install the remaining fasteners, and tighten all screws.
NOTE:
Use the CHS-ADP in conjunction with the appropriate chassis when installing older equipment in the CAB-5 Enclosure.
Keyhole dimensions
Height of
mounting bolt
after installation
1.125”
(2.858cm)
0.500”
(1.27cm)
0.250”
(0.635cm)
0.500”
(1.27cm)
