E
N
G
LI
S
H
7
Assembly of Base Support
1.
Attach Push Handle (E) from outside Storage Compartment (B) using supplied #1 Screws.
2.
Insert Cross Bar (K) into the square inserts on the inside of Base Support (I)
and secure from below with two #2 Screws. Insert the Leg Assembly (L) over
the protruding ends of the Base Support (I) and fasten from the inside of Base
Support (I) using four #4 Bolts, four #5 Flat Washers, and four #7 Nut Caps.
3.
Assemble Base Support (I) into the bottom of the Storage
Compartment (B) and secure with four #3 Bolts.
文件使用
"pdfFactory Pro"
试用版本创建
www.fineprint.cn
文件使用
"pdfFactory Pro"
试用版本创建
www.fineprint.cn
