Nostalgia Electrics Retro BPC700, Instruction Manual

Page: 9 / 12

E
N
G
LI
S
H
7
HOW TO OPERATE
Before first use, clean the inside of the BEVERAGE PARTY COOLER
using a non-abrasive sponge or cloth and lukewarm water mixed
with a mild detergent. Dry thoroughly prior to use.
INSTALLATION
1. The cooler should be placed on a completely flat surface.
Allow 1 foot of space on all sides of the cooler.
2. Choose a location for your cooler that is not exposed to direct sunlight, high temperature
or humidity, or rain. DO NOT operate the cooler near water or swimming pools.
3. The surface of the location where the cooler is installed should be firm and
flat. If cooler is not secured in a proper location, noise and vibration may
occur. The refrigeration system of the cabinet is designed to operate with the
cabinet located on a flat surface. DO NOT tilt the cabinet to the side.
4. If the cabinet must be tilted on an angle for handling or moving purposes,
allow it to sit in an upright position 20 to 30 minutes prior to plugging
it in and starting the cooling of the storage compartment.
OPERATING THE COOLER
1. Insert power plug into wall outlet.
2. Press power button on front (right of digital display) to turn on the refrigeration system.
3. Press the thermostat button on the front (left of the digital display) to adjust the
desired temperature for the refrigeration system. The temperature will increase 1
degree F per each press. The display will flash during the adjustment. To adjust the
temperature down, continue to press the thermostat button. The temperature will
cycle through the highest available temperatures and come back to the low ones.
4. During normal use, the display will show the average temperature inside the cooler.
5. The thermostat ranges from 39 - 61 degrees F. During normal use, the display will show the
average temperature inside the cooler.
SUGGESTED TEMPERATURES:
.
Bottled water, soda or beer: 39 degrees F
.
White wine: 45 - 50 degrees F
.
Red wine: 55 - 61 degrees F
6. When using the BEVERAGE PARTY COOLER for the first time, allow
the unit to operate continuously for 12 - 18 hours.
7. Alternate the racks within the cooler every 6 hours to improve cooling.
8. There should always be some space between items inside for air
circulation. DO NOT fill with liquids, as there is no drainage hole.
9. Beverages should be kept in sealed containers to avoid spilling.
10. Reducing the frequency of opening the cover can lower the electronic consumption.
NOTE:
Do not use any electronic equipment inside the appliance.
MOVING
The rolling casters make transporting the BEVERAGE PARTY COOLER easy. When moving,
do not tilt appliance more than 45 degrees. Be very careful not to bump the cooler into
anything.