Nostalgia Electrics KEG9000DTSS, Instruction Manual

Page: 10 / 16

E
N
G
LI
S
H
8
KEGORATOR SETUP:
Tap Tower, Coupler & Regulator
INSTALLING THE TAP TOWER
After installing the casters, place the rubber beer tower washer (A) over the hole in the top
of your kegorator. Feed the Tap Tower hose lines through the hole, and line up the holes
in the washer with the holes in the kegeorator and those in the base of the Tap Tower.
Using the four screws and nuts provided, attach the Tap Tower to the top of the kegorator.
Slide the smaller rubber washer (B) up the Tap Tower hoses, then the large nut. Screw
in place until about an inch of the threaded end sticks out in the main compartment
of the kegorator. Attach the handle of the Tap Tower by twisting it into place.
Tap Tower
Washer A
Tap Tower
Washer B
Tap Tower Nut