1.
Make sure your TV is turned off.
2.
Connect the HDMI Cable from the HDMI port on the back of the STB to the
HDMI input on your TV.
3.
Turn on your TV. Make sure that your TV is set to the proper input.
4.
Plug one end of the STB power cord into the STB, and the other end into the
power outlet.
5.
As the STB starts up, it will display the following message:
No network
connection. Make sure the network cable is connected or press OK to begin Wi-Fi
WPS.
6.
At this point you are now going to connect your new STB to your WIFI
access point. Press OK on the remote control to start the association process
on the new STB. You will now see the following message on the TV:
Connecting to WIFI... Press the WPS button on your wireless access point.
7.
Go to your WIFI access point (router) and start WPS.
8.
In a few seconds, the new set top box should indicate that it has
connected with the following message:
Wi-Fi connected. Waiting for
network setup.
9.
As your STB loads, you will see a welcome screen indicating the STB is
loading.
10.
Once the STB has loaded you are ready to stream. Enjoy your Norvado TV!
